|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS FEATURES: DESCRIPTION: IDT74ALVC162244 * 0.5 MICRON CMOS Technology * Typical tSK(o) (Output Skew) < 250ps * ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) * VCC = 3.3V 0.3V, Normal Range * VCC = 2.7V to 3.6V, Extended Range * VCC = 2.5V 0.2V * CMOS power levels (0.4 W typ. static) * Rail-to-Rail output swing for increased noise margin * Available in SSOP, TSSOP, and TVSOP packages This 16-bit buffer/driver is built using advanced dual metal CMOS technology. The ALVC162244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE) inputs. The ALVC162244 has series resistors in the device output structure which will significantly reduce line noise when used with light loads. This driver has been designed to drive 12mA at the designated threshold levels. DRIVE FEATURES: * Balanced Output Drivers: 12mA * Low switching noise APPLICATIONS: * 3.3V high speed systems * 3.3V and lower voltage computing systems FUNCTIONAL BLOCK DIAGRAM 1O E 1 3O E 25 1A1 47 2 1Y1 3A1 36 13 3Y 1 1A2 46 3 1Y2 3A2 35 14 3Y2 1A3 44 5 1Y3 3A 3 33 16 3Y3 43 1A4 6 32 1Y4 3A 4 17 3Y4 2O E 48 4O E 24 2A 1 41 8 2Y1 4A1 30 19 4Y 1 2A2 40 9 2Y2 4A2 29 20 4Y2 2A 3 38 11 2Y3 4A3 27 22 4Y3 2A 4 37 12 2Y4 4A4 26 23 4Y4 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE 1 (c) 1999 Integrated Device Technology, Inc. MARCH 1999 DSC-4560/1 IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE PIN CONFIGURATION 1OE 1Y1 1Y2 ABSOLUTE MAXIMUM RATINGS(1) Symbol Description Max VTERM(2) Terminal Voltage with Respect to GND Storage Temperature DC Output Current Continuous Clamp Current, VI < 0 or VI > VCC Continuous Clamp Current, VO < 0 Continuous Current through each VCC or GND -0.5 to +4.6 -0.5 to VCC+0.5 -65 to +150 -50 to +50 50 -50 100 Unit V V C mA mA mA mA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 2OE 1A1 1A2 VTERM(3) Terminal Voltage with Respect to GND TSTG IOUT IIK IOK ICC ISS GND 1Y3 1Y4 GND 1A3 1A4 VCC 2Y1 2Y2 VCC 2A1 2A2 GND 2Y3 2Y4 3Y1 3Y2 GND 2A3 2A4 3A1 3A2 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC. CAPACITANCE (TA = +25C, F = 1.0MHz) Symbol CIN COUT COUT Parameter(1) Input Capacitance Output Capacitance I/O Port Capacitance Conditions VIN = 0V VOUT = 0V VIN = 0V Typ. 5 7 7 Max. 7 9 9 Unit pF pF pF GND 3Y3 3Y4 GND 3A3 3A4 NOTE: 1. As applicable to the device type. VCC 4Y1 4Y2 VCC 4A1 4A2 PIN DESCRIPTION Pin Names xOE xA x xYx Data Inputs 3-State Outputs Description 3-State Output Enable Inputs (Active LOW) GND 4Y3 4Y4 4OE GND 4A3 4A4 3OE FUNCTION TABLE (EACH 4-BIT BUFFER)(1) SSOP/ TSSOP/ TVSOP TOP VIEW Inputs xOE L L H NOTE: 1. H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High-Impedance Outputs xAx H L X xYx H L Z 2 IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = -40C to +85C Symbol VIH VIL IIH IIL IOZH IOZL VIK VH ICCL ICCH ICCZ ICC Parameter Input HIGH Voltage Level Input LOW Voltage Level Input HIGH Current Input LOW Current High Impedance Output Current (3-State Output pins) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = 2.3V, IIN = -18mA VCC = 3.3V VCC = 3.6V VIN = GND or VCC One input at VCC - 0.6V, other inputs at VCC or GND VCC = 2.3V to 2.7V VCC = 2.7V to 3.6V VCC = 2.3V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V VCC = 3.6V VCC = 3.6V VI = VCC VI = GND VO = VCC VO = GND Test Conditions Min. 1.7 2 -- -- -- -- -- -- -- -- -- Typ.(1) -- -- -- -- -- -- -- -- -0.7 100 0.1 Max. -- -- 0.7 0.8 5 5 10 10 -1.2 -- 40 V mV A A A A V Unit V Quiescent Power Supply Current Variation -- -- 750 A NOTE: 1. Typical values are at VCC = 3.3V, +25C ambient. OUTPUT DRIVE CHARACTERISTICS Symbol VOH Parameter Output HIGH Voltage VCC = 2.3V VCC = 2.7V VCC = 3V VOL Output LOW Voltage VCC = 2.3V to 3.6V VCC = 2.3V VCC = 2.7V VCC = 3V Test Conditions(1) VCC = 2.3V to 3.6V IOH = - 0.1mA IOH = - 4mA IOH = - 6mA IOH = - 4mA IOH = - 8mA IOH = - 6mA IOH = - 12mA IOL = 0.1mA IOL = 4mA IOL = 6mA IOL = 4mA IOL = 8mA IOL = 6mA IOL = 12mA Min. VCC - 0.2 1.9 1.7 2.2 2 2.4 2 -- -- -- -- -- -- -- Max. -- -- -- -- -- -- -- 0.2 0.4 0.55 0.4 0.6 0.55 0.8 V Unit V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = - 40C to + 85C. 3 IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE OPERATING CHARACTERISTICS, TA = 25C VCC = 2.5V 0.2V Symbol CPD CPD Parameter Power Dissipation Capacitance Outputs enabled Power Dissipation Capacitance Outputs disabled Test Conditions CL = 0pF, f = 10Mhz Typical 16 4 VCC = 3.3V 0.3V Typical 19 5 Unit pF SWITCHING CHARACTERISTICS(1) VCC = 2.5V 0.2V Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tSK(o) Parameter Propagation Delay xAx to xYx Output Enable Time xOE to xYx Output Disable Time xOE to xYx Output Skew(2) 1 6.3 1 6.8 Min. 1 Max. 4.9 Min. VCC = 2.7V Max. 4.7 6.7 5.7 VCC = 3.3V 0.3V Min. 1 1 1 Max. 4.2 5.6 5.5 500 Unit ns ns ns ps -- -- -- -- -- -- -- -- NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = - 40C to + 85C. 2. Skew between any two outputs of the same package and switching in the same direction. 4 IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE V IH VT 0V V OH VT V OL VIH VT 0V ALVC Link TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS Symbol VLOAD VIH VT VLZ VHZ CL VCC(1)= 3.3V0.3V VCC(1)= 2.7V 6 2.7 1.5 300 300 50 VCC 500 Pulse Generator (1, 2) SAME PHASE INPUT TRA NSITION VCC(2)= 2.5V0.2V 2 x Vcc Vcc Vcc / 2 150 150 30 Unit V V V mV mV pF VLOAD Open GND tPLH OUTPUT tPLH OPPOSITE PHASE INPUT TRA NSITION tPHL 6 2.7 1.5 300 300 50 tPHL Propagation Delay ENA BLE CONTROL IN PUT tPZL DIS ABLE V IN D.U.T. VOUT VIH VT 0V VLOAD/2 VOL + VLZ VOL VOH VOH - V HZ 0V ALVC Link tPLZ VLOAD/2 VT tPHZ VT 0V RT 500 CL ALVC Link Test Circuit for All Outputs DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. NOTES: 1. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2.5ns; tR 2.5ns. 2. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2ns; tR 2ns. OUTPUT SW ITCH NORMALLY CLO SED LOW tPZH OUTPUT SWITCH NORMA LLY O PEN HIGH NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. VIH VT 0V VIH VT 0V VIH VT 0V VIH VT 0V ALVC Link Enable and Disable Times SWITCH POSITION Test Open Drain Disable Low Enable Low Disable High Enable High All Other Tests Switch VLOAD GND Open VIH INPUT VT 0V VOH OUTP UT 1 VT VOL VOH OUTPUT 2 tPLH2 tPHL2 ALVC Link DATA INPUT TIMING INP UT A SYNCHRONOUS C ON TROL SYNCHRONOUS C ON TROL tSU tH tREM tSU tH Set-up, Hold, and Release Times tPLH1 tPHL1 LOW -HIGH-LOW PULSE tW HIGH-LOW -H IGH PULSE VT tSK (x) tSK (x) VT ALV C Link VT VOL Pulse Width tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1 Output Skew - tSK(X) NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank. 5 IDT74ALVC162244 3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDT XX ALVC X Bus-Hold XX Family XXX D evice Type XX Package Temp. R ange PV PA PF 244 162 Shrink Small O utline Package (SO48-1) Thin Shrink Sm all O utline Package (SO48-2) Thin Very Small O utline Package (SO48-3) 16-Bit Buffer/Driver w ith 3-State Outputs D ouble-D ensity w ith R esistors, 12m A Blank 74 N o Bus-Hold - 40C to +85C CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com for Tech Support: logichelp@idt.com (408) 654-6459 6 |
Price & Availability of IDT74ALVC162244 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |